Beta Releases

02.23.2025 - End User Requests and Bug Fixes
  
  1. Fixed GPT and SGPT Sizes for newer MTK based Soc

  2. Fixed FRP on older Androids - Thanks to KUMAR VISHWAKARMA

  3. Added EMMC Firmware Contributed by End User
     3V6CAB : KM3V6001CM-B708 (by Bilal Akash)


02.18.2025 - End User Requests and Bug Fixes

  1. Added New FRP Remove Option for persistent partition data fill
     * You can now select to fill partition with 0xFF or 0x00
  
  2. Added EMMC Firmware Contributed by End Users:
     3V6CBB : KM3V6001CM-B705 (by yu luosheng)

  3. UFS Amplitude Setting now defaults at 316 mV for more compatibility


02.15.2025 - End User Requests and Bug Fixes

  1. Initial support for Monitors with less than 1080p Resolution

  2. Added EMMC Firmware Contributed by End Users:
     RC14MB : KMRC10014M-B809 (by SadaM)
     BJTD4R : KLMBG2JETD-B041 (by SadaM)
     GX6BAB : KMGX6001BA-B514 (by SadaM)
     DV6DBB : KMDV6001DB-B625 (by SadaM)
     QD63MB : KMQD60013M-B318 (by SadaM)
     QX63AB : KMQX60013A-B419 (by SadaM)


02.14.2025 - End User Requests and Bug Fixes
  
  1. Fixed sboot target partition from PIT for the following Exynos SoC:
    * Reported by MasterUnlockGSM from Venezuela    
       Exynos 1280
       Exynos 1330
       Exynos 1380
       Exynos 1480
       Exynos 1580
       Exynos 2200
       Exynos 2400
    
    
  2. Added PIT File Support for UFS Provisioning

  3. Fixed MTK Preloader Boot Relay Table for newer SoCs (UFS and EMMC)     
    * Reported by Knotthailand

  4. Added SkHynix EMMC FFU files for:
       hB8aP>
       hC8aP>
       hC9aP3
       hDEaP3

    * These eMMC Firmware will allow RPMB Key Reading, Unlimited Repartitioning, WP Removal and CID/CSD Write
    * Performing FFU on SK Hynix eMMC will NOT result in data loss.
    * Avoid performing multiple FFU operations on the same eMMC, as its firmware uses a static NAND page address. 
      This means the page cannot be relocated if bad blocks begin to develop.

  5. Added the ability to set the working directory using the HOME button located at the lower right corner of the software.
     * Suggested by MasterUnlockGSM from Venezuela

  6. A separate rawprogram.xml per LUN will now be generated during partition backups.
     * Suggested by MasterUnlockGSM from Venezuela

  7. Enhanced the speed of FFU reading for Samsung eMMC.

  8. UFS VCC is now set to 2.80V by default.

  9. Added support for UFS 4.1 new descriptors, attributes and flags.


02.05.2025 - End User Requests and Bug Fixes

  1. Added eMMC Boot Config Information in Connection Logs

  2. Added Auto LBA Skip on eMMC with Secure Write Protected Blocks

  3. Added Detailed Connection ERROR Resolution for UFS ISP

  4. Added EMMC Firmware Contributed by End Users:
     DV6DAB : KMDV6001DA-B620 (By Knotthailand)
     GD6BMB : KMGD6001BM-B421 (By Knotthailand)
     DC6DMB : KMDC6001DM-B625 (By Knotthailand)

  5. Fixed GUI Freeze on UFS and EMMC Read Timeouts


02.01.2025 - Initial Update and Bug Fixes
  
  1. Added Auto LBA Skip on UFS with Secure Write Protected Blocks

  2. Added UFS Secure Write Protection Removal (WP Remove)

     ** Use this option at your own risk **

     According to our tests, most UFS will suffer 100% Data Loss with
     a very few exception listed below
     
     Brand  | UFS Specification | Data Status after WP Remove
    -------------------------------------------------------------
    Samsung | 2.0               | NO Data Loss
    Samsung | 2.1               | NO Data Loss
    Samsung | 2.2               | NO Data Loss
    Samsung | 3.0               | NO Data Loss
    Samsung | 3.1               | NO Data Loss
    Samsung | 4.0               | WARNING 100% Data Loss on all LUNs !!! - make backup all LUNs !!!
    -------------------------------------------------------------
    YMTC    | 2.2               | NO Data Loss
    -------------------------------------------------------------
    Other Brands (SkHynix, Micron, KIOXIA etc...) will experience 100% Data Loss on all LUNs !!! - make backup all LUNs !!!


01.22.2025 - Initial Early Release







Official Releases

  NONE
     


             